Spool cap
Orsó sapkája
Kołpak szpulki
Capac bobină
Pokrovček za motek
Kapica špule
Spoles vāks
Niidirulli kaas
Ritės dangtelis
Thread spool
Cérnaorsó
Szpulka nici
Bobină de fir
Motek s sukancem
Špula s koncem
Diega spole
Niidirull
Siūlų ritė
Press in
Nyomja be
Naciśnij
Apăsa i
Pritisnite
Navucite
Spiedien uz iekšu
Vajutage sisse
Spauskite
1
2
70
9. HOW TO OPEN AND CLOSE LOOPER
COVER
(1) OPEN LOOPER COVER
* Push the looper cover to the right as far as it will
go.
* Pull looper cover down toward you.
(2) CLOSE LOOPER COVER
* First pull the looper cover upward and then slide it
to the left until it locks.
Note : The looper cover has a safety switch and
the machine will not sew if the looper cover
is open.
8. REMOVAL AND REPLACEMENT OF
CHIP BOX
(1) REPLACEMENT
* Position the machine so the front is nearly
aligned with the
edge of the table.
*
Insert the chip box under the looper cover. Be
sure the left side of chip box is mounted near the
cutter where the scraps drop.
(2) REMOVAL
*
To remove, hold the chip box as shown and pull it
outward.
(3) SPOOL CAP
*
When using a regular thread spool, fit the spool
cap supplied with the machine onto the thread
spool as shown at right.
Be sure to turn off power switch.
Assurez-vous que le couvercle de
boucleur est fermé lors d'une couture.
2
1
