– 5 –
(3) pitch time monitor screen No. 2
1
2 3
1
2
3
7
5
6
4
B
A
<pitch time monitor screen No. 2>
On the ptch tme montor screen No. 2, the total producton volume and the average ptch tme n the con-
tnuous secton
selected on the ptch tme montor screen No. are measured and dsplayed. (Sectons
A and B in the figure given below) In addition, the display method employed on the pitch time monitor screen
No. 1 is specified.
Switch/display
description
A Total producton
volume dsplay
The total producton volume n the contnuous secton
selected on the ptch tme mon-
tor screen No. s dsplayed.
(Cauton) The producton volume s approxmately 3200 at the maxmum due to the restrcton
by the ptch tme montor data capacty.
B Average ptch
tme dsplay
The average ptch tme n the contnuous secton
selected on the ptch tme montor
screen No. s dsplayed. It should be noted, however, that ptch tme data equal to or longer
than 00 seconds (30 mnutes) s judged to be abnormal sewng work and s excluded from
calculaton.
1
G r a p h m o d e
c h a n g e o v e r
swtch
The mode of graph dsplayed on the ptch tme montor screen No. s changed over.
Producton volume graph mode :
Vertcal axs : Producton volume
Horzontal axs : Workng tme of day
Ptch tme graph mode :
Vertcal axs : Producton volume
Horzontal axs : Ptch tme
2
Graph's horzon-
tal axs range
settng swtch
The range of the horzontal axs (tme unt n one secton) of the graph dsplayed on the ptch
tme montor screen No. s set.
・
Under the producton volume graph mode :
Settng range : 0 m, 5 m, 20 m, 30 m, h, 2 h, 4 h, h, 2 h, d Intal settng : 30 m
* "m" represents mnute, "h" represents hour and "d" represents day.
・
Under the ptch tme graph mode:
Settng range : 3 s, 5 s, 0 s, 5 s, 20 s, 30 s, m
Intal settng : 5 s
* "s" represents second and "m" represents mnute.
3
Graph's vertcal
r a n g e s e t t n g
swtch
The range of the vertcal axs of the graph dsplayed on the ptch tme montor screen No. s set.
Settng range: 0, 20, 50, 00, 200, 500, 000, 2000, 3000, 5000, auto Intal settng : auto
* In the case of "auto," the range s automatcally selected to dsplay the producton volume on
the vertcal axs as large as possble at all tmes.
4
Producton volume
count-up swtch
The producton volume s counted up wth one tem added.
5
Clear swtch
The ptch tme montor data recorded n the sewng machne memory are cleared.
* When this switch is pressed, the clear confirmation popup screen appears. Press
swtch
to clear the data, or
swtch to cancel clearng.
6
Measurement
stop swtch
Measurement and recordng of sewng machne operaton data are stopped.
When measurement s beng carred out,
s dsplayed.
When measurement s n the stop status,
s dsplayed.
7
Dsplay changeover
swtch to dsplay the
ptch tme montor
screen No.
The ptch tme montor screen No. s dsplayed.
