– 44 –
00 Number of sttches
sewn before thread
clamp works at
the begnnng of
sewng
Sets the number of sttches to be sewn at the begnnng of sewng
before the thread clamp solenod (CN3-) starts operatng
0 : Thread clamp solenod does not operate.
-9 : The number of sttches to be sewn before the thread clamp
solenod operates
0-9
(sttches)
N-GAST
03 Needle cooler
output OFF delay
tme
Delay tme from the stop of sewng machne to the output OFF s
specified using the needle cooler output function.
00 to
to
2000 ms
T-DNCOFF
20 Man shaft
reference angle
compensaton
Man shaft reference angle s compensated.
–0 to 0
A-ZDET
2 Up poston
startng angle
compensaton
Angle to detect UP poston startng s compensated.
–5 to 5
A-UDET
22 DOWN poston
startng angle
compensaton
Angle to detect DOWN poston startng s compensated.
–5 to 5
A-DDET
24 Settng of energy-
savng functon
durng standby
Settng to reduce the power consumpton whle the sewng machne
s n standby state
0: Energy-savng mode s neffectve
: Energy-savng mode s effectve
0
/
F-PSAVE
No.
Item
Descrpton
Settng range
Indcaton of functon settng
* do not change the set values with asterisk (
*
) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer’s Manual and follow the instructions.
