– 43 –
58 Function of holding
predetermined upper/
lower position of the
needle bar
Function of holding predetermined upper/lower position of the needle bar
0 : Not provided with the function of holding predetermined up-
per/lower position of the needle bar
1 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is weak.)
2 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is medium.)
3 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is strong.)
0 to 3
HPOS
59 Function of Auto/
Manual change-
over of reverse feed
stitching at the start
of sewing
This function can specify the sewing speed of reverse feed stitching
at the start of sewing.
0 : The speed will depend on the manual operation by pedal, etc.
1 : The speed will depend on the specified reverse feed stitching speed (No. 8).
0/1
SBTO
60 Function of stop
immediately after
reverse feed stitching
at the start of sewing
Function at the time of completion of reverse feed stitching at the
start of sewing
0 : Not provided with the function of temporary stop of the sewing
machine at the time of completion of reverse feed stitching at
the start of sewing
1 : Provided with the function of temporary stop of the sewing
machine at the time of completion of reverse feed stitching at
the start of sewing.
0/1
SBTQ
64 Change-over speed
of condensation stitch
or EBT (end back
tack)
Initial speed when starting condensation stitch or EBT
0 to 250
(sti/min)
S-WAIT
70 Function of soft-down
of presser foot
Presser foot is slowly lowered.
0 : Presser foot is rapidly lowered.
1 : Presser foot is slowly lowered.
0/1
71 Double reverse
feed stitching
function
This item is not used on the IT-100.
0/1
F-SDFL
72 Sewing machine
startup selecting
function
Current limit at the startup of sewing machine is specified.
0 : Normal (Current limit is applied during startup)
1 : Rapid (Current limit is not applied during startup)
0/1
F-ACRA
73 Retry function
This function is used when needle cannot pierce materials .
0 : Normal
1 to 10 : Retry function is provided.
0 to 10
F-ACR
*
74 With/without thread
trimmer for MF
With/without thread trimmer for MF is selected.
0 : Not provided with the tread trimmer
1 : Provided with the thread trimmer
0/1
F-RET
76 One-shot function
This item is not used on the IT-100.
0/1
DM
*
84 Initial motion suction
time of presser foot
lifting solenoid
Suction motion time of presser foot lifting solenoid
50 to 500
(ms)
T-PUT
87 Function of pedal
curve selection
Pedal curve is selected. (Improving pedal inching operation)
Sewing speed
Pedal stroke
2
0
1
0
/
1
/
2
F-PCS
90 Initial motion up stop
function
Automatic UP stop function is set immediately after turning ON the power.
0 : off
1 : on
0/1
NUO
91 Function of prohibiting
compensation operation
after turning handwheel by
hand
It is effective in combination with the machine head provided with
tension release function.
0 : Tension release function is ineffective.
1 : Tension release function is effective.
0
/
1
F-PMAT
92 Function of reducing
speed of reverse feed
stitching at the start
of sewing
Function to reduce speed at the time of completion of reverse feed
stitching at the start of sewing.
0 : Speed is not reduced.
1 : Speed is reduced.
0
/
1
F-DSBT
93 Function added to
needle up/down
compensating switch
Operation of needle up/down compensating switch is changed after
turning ON the power or thread trimming.
0 : Normal (needle up/down compensating stitching only)
1 : One stitch compensating stitching is performed only when
aforementioned changeover is made. (Upper stop
→
upper
stop)
0
/
1
F-MADF
94 Cont One-
shot nonstop function
The function that does not stop the sewing machine by combining
continuous stitching with one-shot stitching using the program sew-
ing function which is available in the operation panel.
0 : Normal (The sewing machine stops when a step is complet-
ed.)
1 : The sewing machine does not stop when a step is completed
and proceeds to next step.
0
/
1
F-SBTC
95 Head selection
function
Machine head to be used is selected.
(When the machine head is changed, each setting item is changed to
the initial value of the machine head.)
96 Max. sewing speed
setting
Max. sewing speed of the sewing machine head can be set. (The
MAX value differs by machine head.)
150 to MAX
(sti/min)
S-MAX
No.
Item
Description
Setting range
Indication of function setting
* Do not change the set values with asterisk (
*
) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer’s Manual and follow the instructions.
