– 2 –
4
3
2
2
1
1
(3) Setting the sewing recorder function
The operaton and the dsplay-related basc tems of the sewng recorder functon can be set on the <Sewng
recorder functon settng screen> under the nformaton mode.
<Sewing recorder function setting screen>
Input data on tems
1
and
2
referrng to the table gven below.
When Enter swtch
3
is pressed, the input data is confirmed. When
Cancel swtch
4
s pressed, the nput
data s cancelled and the screen s restored to the prevous screen.
No.
Item to be set
description
1
Data samplng tme
Sets the tme nterval for measurng and recordng the sewng speed of the sew-
ng machne.
Set value : 0.05, 0.0, 0.50, .00, .50, 2.00 (sec)
Intal value : 0.0 (sec)
* Data over the time interval specified by the set value "0.05: 25 minutes," "0.10:
50 mnutes," "0.50: 250 mnutes," ".00: 500 mnutes," ".50: 50 mnutes," or
"2.00: 000 mnutes" can be stored n memory of the sewng machne. When
the memory capacty s exceeded, the oldest pece of data s erased to store
the latest pece of data at all tmes.
* The accuracy of the graph plotted depends on the tme nterval set vale.
2
Upper lmt value of ver-
tcal axs of the chart
(sewng speed)
The upper lmt of the graph dsplayed on the sewng recorder screen No. 2 s
set.
Set value : 000, 9000 (st/mn)
Intal value : 000 (st/mn)
* On the sewng recorder screen No. 2, the graph can be used under the auto
range mode or by settng an arbtrary range n ncrements of 000 (st/mn) not
more than the upper lmt.
* Refer to
. 2-2. displays on the screen for the production support function"
cedure to be taken untl ths screen s dsplayed.
