22
4.5. Placing and releasing “JUKI Smart Feed”
“JUKI Smart Feed” is used when sewing the materials (knit, jersey, vinyl cloth, artificial leather, etc.) that are general
-
ly hard to be fed, and the materials (quilt, etc.) that are likely to cause uneven material feed.
“JUKI Smart Feed” can only be used for sewing limited types of patterns.
●
Placing “JUKI Smart Feed”
Raise the presser foot.
Fully lower “JUKI Smart Feed”
❶
while pinching it with
fingers.
When “JUKI Smart Feed” is fitted appropriately, the
relevant icon is displayed on the screen.
●
Adjusting “JUKI Smart Feed”
Press
.
Adjust “JUKI Smart Feed” by pressing the icon.
(Setting range: -5.0 - 5.0)
The top feed amount
is decreased.
The top feed amount
is increased.
The set value is confirmed by pressing
.
●
Releasing “JUKI Smart Feed”
Raise the presser foot.
Pinching “JUKI Smart Feed”
❶
, pull it down and push
backward until it is brought to its upper position.
❶
❶
The top feed amount will
be returned to its initial
value by pressing the blue
frame.
The top feed amount
can also be adjusted by
sliding the slide bar to the
right or left.
Summary of Contents for HZL-NX7
Page 2: ......
