manualshive.com logo in svg

JUKI HZL-NX7, Instruction Manual

Share
Download
JUKI HZL-NX7 Instruction Manual Download Page 46

44

4.17. Needle positions / Zigzag width / Stitch length

①

  Press 

 .

  The adjustment item of the adjusting dial (left) will be the 

“needle position”.

②

  Change the needle position with the adjusting dial (left).

  Turning to the left, the needle moves to the left.
  Turning to the right, the needle moves to the right.

  The leftmost end represents “0.0” The rightmost end rep

-

resents “7.0”.

  The needle position is represented by     of 

.

  Numeric values displayed on the screen: In mm

0.0

3.5

7.0

Adjusting dial (left)

①

  Press 

 .

  The adjustment item of the adjusting dial (left) will be the 

“zigzag width”.

②

  Change the zigzag width 

A

 with the adjusting dial (left).

  The displayed numeric value is decreased and the zigzag 

width is decreased by turning the dial counterclockwise.

  The displayed numeric value is increased and the zigzag 

width is increased by turning the dial clockwise.

  The zigzag width can be adjusted while sewing.

  Numeric values displayed on the screen: Measure of the 

zigzag width (In mm)

A

Adjusting dial (left)

2.0

7.0

■

 When changing the needle position

■

 When changing the zigzag width

Summary of Contents for HZL-NX7

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands