manualshive.com logo in svg

JUKI HZL-NX7, Instruction Manual

Share
Download
JUKI HZL-NX7 Instruction Manual Download Page 13

11

Name

Function

Selection screen 

extension tab

The pattern group display screen can be changed to the full-screen dis

-

play.

The previous screen can be restored by pressing the selection screen 

extension tab again.

Ⓐ

Presser Foot

Suitable presser foot for the stitch pattern is displayed.

Ⓑ

Needle Position

Needle position   is displayed.

Ⓒ

Type of Throat Plate

The type of throat plate is displayed.

 : Standard throat plate

 : Throat plate for straight stitch

Ⓓ

-

Sewing Condition

Stitch Pattern which is sewn currently or to be sewn is displayed.

A

Option key

Setting of 14 types of options can be set.
* Available options differs according to the selected stitch pattern.

B

Guide key

Basic operations can be checked.

C

Lock Mode Key *1

When pushing it, all the operations are disabled.
In order to release the lock mode, press the lock mode key for 1 seconds.

D

Return key

When pushing it, the screen goes back to the previous page.
Combination Pattern mode can delete the selected pattern.

E

Clear key

Setting of Stitch Pattern can be returned to the default setting.

F

Adjusting Dial (Left)

This dial will be used when adjusting zigzag width or needle position.
The zigzag width can be changed by pressing the zigzag width icon.
The zigzag width is increased by turning this dial clockwise.
The zigzag width is decreased by turning this dial counterclockwise.
The needle position can be changed by pressing the needle position icon.
The needle is shifted to the right by turning this dial clockwise.
The needle is shifted to the left by turning this dial counterclockwise.

G

Adjusting Dial 

(Right)

This dial will be used when adjusting stitch length.
The stitch length is increased by turning this dial clockwise.
The stitch length is decreased by turning this dial counterclockwise.

* 1

Lock Mode

 given in the Instruction Manual means 

that operation of all keys is disabled by pressing the 

.

(Refer to page 61)

Summary of Contents for HZL-NX7

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands