JUKI HZL-NX7 Instruction Manual Download

Page: 60 / 128

⑬

Firmware update

Press

Backup data is saved on the USB thumb drive.

It is possible to update the firmware.
Contact your distributor if you have any question about the software.

When you update the software with a USB thumb drive, so sure to save only the latest

update file on it.

If any other data or earlier version of update file are included, the software cannot be

updated properly.

Do not turn the power OFF during the update work.

1. Saving the backup data

❶

❷

Insert USB thumb drive

❷

which contains no data or con

tains only the update file into USB slot

❶

Caution:

In the case of using a USB that is provided with an

access indicator, the access indicator will start blink-

ing for five to six seconds when the USB thumb drive

is inserted into the USB slot of your PC or sewing ma-

chine until it is recognized.

(The time required until the USB thumb drive is rec-

ognized differs with the type of USB thumb drive.)

Summary of Contents for HZL-NX7

































































































































Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands

JUKI HZL-NX7, Instruction Manual

Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands