manualshive.com logo in svg

JUKI HZL-NX7, Instruction Manual

Share
Download
JUKI HZL-NX7 Instruction Manual Download Page 113

111

5

Push reverse stitch button when it comes 

to the sewing start point 

❺

.

❺

6

Sew bartack and lock stitches until the 

machine stops automatically.

Trim the thread. Lift the presser foot. Then, remove 
the material from the sewing machine.

7

Pierce a stopper pin at the bartack and 

open the buttonhole with a ripper 

❻

.

Be careful not to cut the stitches.

*  In the case of a 2-step buttonhole, sewing di-

rection of the left and that of the right side is 

different. Due to this and according to fabrics to 

be sewn, it may be possible that the density of 

each side looks different.

❻

 *  

  No. 403 In the case of 2-step buttonhole (Memory)

  Since the length of a 

buttonhole

 that is sewn for the first time is stored in memory, step of procedure 

4

 is not required for 

buttonhole for the 2nd time and beyond.

  If you want to change the 

buttonhole length stored in memory, any other pattern should be selected.

Summary of Contents for HZL-NX7

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands