JUKI HZL-NX7 Instruction Manual Download

Page: 61 / 128

Press

2. Updating the software

The latest update file is downloaded to the sewing machine.

When the software is updated properly, the message “Update
complete” is displayed on the screen.
Remove the USB thumb drive and turn OFF the power to the
sewing machine. Then, re-turn ON the power to the sewing
machine.

Caution:

If write progress bar

❸

does not move for three min-

utes or more, update may have failed.

In such a case, turn OFF the power to the sewing ma-

chine.

Remove the USB thumb drive. Then, re-turn ON the

power to the sewing machine.
In the case the software updating has failed, the

software update screen will be displayed immediately

after re-turning the power ON.

Carry out updating of the software on this screen

again.

❸

3. Loading the backup data

Settings are retained after updating the software. If the set

tings are totally initialized through the software updating pro

cedure, the settings can be retrieved by loading the backup
data.

Summary of Contents for HZL-NX7

































































































































Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands

JUKI HZL-NX7, Instruction Manual

Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands