JUKI HZL-NX7 Instruction Manual Download

Page: 27 / 128

4.8. Attaching the needle

●

Needles to be purchased

When purchasing spare needles,

specify HA×1 (130/705H) or HA×1 SP
(needle for knits) .

●

Checking the needle

Check the needle for its straightness occasionally.
Any bent needle would cause skipped stitches, thread breakage or damage
to materials.

❺

The flat part of the needle

❻

Flat object

❻

❺

Needle size:

The larger the number, the thicker the needle.

If the needle is not properly installed or a bent

needle is used, needle breakage can be caused.

It will cause damage to the machine.

Attention:

❷

❶

❹

❸

●

Removing needle

Turn the hand wheel towards you until the needle

comes to the highest position and lower the presser
foot.

Turn the needle setscrew

❷

towards you 1-2 times

and remove the needle.

❶

T-shape screwdriver

●

Attaching the needle

Hold the needle with its flat part facing away from you

(

❸

), and insert it fully until it touches the stopper pin

❹

Securely tighten the needle setscrew.

The needle cannot be inserted unless it is cor-

rectly positioned.

Turn off the machine or leave the

Machine in Lock Mode

Summary of Contents for HZL-NX7

































































































































Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands

JUKI HZL-NX7, Instruction Manual

Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands