JUKI HZL-NX7 Instruction Manual Download

Page: 118 / 128

116

8. Message catalog

Message

Cause (Reason to display such messages)

Pictograph

English

Same as the left

When the sewing machine starts up, or when the
needle moves.
The needle is moved by pressing

Then, the initial screen is displayed.

In the case the retaining of the previous pattern is
set in the optional startup settings.

When attempting to overwrite the existing pattern
saved in a folder with another pattern.

Same as the left

In the case the deletion of the pattern in the folder
is attempted.

In the case the setting of pattern is changed in the
optional settings.

When changing the 1-needle mode to the 2-nee

dle mode.

When changing the 2-needle setting to the 1-nee

dle setting.

* The message is turned OFF by carrying out the operation which corresponds to the message or pressing

Summary of Contents for HZL-NX7

































































































































Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands

JUKI HZL-NX7, Instruction Manual

Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands