JUKI HZL-NX7 Instruction Manual Download

Page: 50 / 128

4.19. Setting the stop position of needle

It is possible to set the position of the needle (upper or lower position) at the time of stopping the sewing machine.

: ON

: OFF

When

is pressed, the setting screen is displayed.

● Setting the ON / OFF of the pivot function

: ON

: OFF

● Setting the pivot height

Adjust the pivot height with

The set value is confirmed by pressing

: The sewing machine stops with its needle down

: The sewing machine stops with its needle up

* In the case the “upper stop position” (the sewing machine

stops with its needle up) is selected, the pivot function will
be automatically turned OFF.

4.20. Pivot setting

It is possible to set so that the presser foot goes up while the needle is kept at the lower position at the time of stop

ping the sewing machine.

Summary of Contents for HZL-NX7

































































































































Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands

JUKI HZL-NX7, Instruction Manual

Search results

Summary of Contents for HZL-NX7

Reviews:

Related manuals for HZL-NX7

Brands by name

Popular brands