Installation and operating instructions: JUDO UNIDOS digital dosing pump systems JUD-KH 6-50 and 6-100 (cold water) / JUD-HH 6-50 and 6-100 (hot water)
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 20.04.2017
E-Mail: [email protected]
Internet: www.judo.eu
7
1.2
General safety instructions
Warning
Any working methods that might endanger safety must be avoided!
Non-observation of these installation and operating instructions and the safety
instructions herein may endanger persons, as well as the environment and the JUDO
UNIDOS digital dosing pump system itself!
Warning
When used in the hot water section there is a danger due to hot surfaces or danger due
to scalding!
The safety instructions do not take into account
Random happenings and events that may occur during installation, operating and maintenance.
Location related safety conditions for the observance of which the operator is responsible, even for
contract installation personnel.
Attention
Unauthorised conversions and changes to the JUDO UNIDOS digital dosing pump
system or tampering with system components are forbidden for safety reasons!
Do not perform any changes, make any additions or carry out any conversions that
could impair safety w
ithout the manufacturer’s written approval!
Never remove safety equipment or deactivate it by making changes to the JUDO UNIDOS
digital dosing pump system!
The safety instructions of these installation and operating instructions must be
observed without fail, additional industry-wide and in-house safety instructions remain
in force!
Only operate the JUDO UNIDOS digital dosing pump system with the caps and covers of
all system components correctly closed!
Fault-free operation of the JUDO UNIDOS digital dosing pump system is only ensured if
original spare parts and components are used in the combination described in these
installation and operating instructions, otherwise there is a risk of malfunctioning or
damage!
Only allow authorised technical personnel to carry out repairs!
All work on electrical system components must only be performed by qualified
electricians certified according to an approved national scheme!
The electrical system components must be checked regularly!
Loose connections must be tightened immediately and damaged system components
immediately replaced!
Ensure that any dosing medium that escapes from the dosing pump or damaged pipes
does not cause any damage; the use of bunding is recommended!
