Installation and operating instructions: JUDO UNIDOS digital dosing pump systems JUD-KH 6-50 and 6-100 (cold water) / JUD-HH 6-50 and 6-100 (hot water)
All rights reserved.
JUDO Wasseraufbereitung GmbH
© JUDO Wasseraufbereitung GmbH
Postfach 380
D-71351 Winnenden
Translation into foreign languages and reproduction, even in excerpt form, is only permitted with special
approval.
Tel. +49 (0)7195-692-0
Fax +49 (0)7195-692-188
Revision level: 20.04.2017
E-Mail: [email protected]
Internet: www.judo.eu
26
5.1.1
Status LEDs for operating state and fault
Dependent on the selected operating mode, the relevant status LED signals the
operating conditions or faults!
Colour
Behaviour Operating state/fault
Green
Flashing
Stop
Green
Illuminated Dosing
Red-Green Flashing
Standby (Ext. Stop)
Amber
Illuminated Low level (dosing running)
Red
Illuminated Empty (dosing stopped)
Red
Flashing
Fault motor blocked (dosing stopped)
Tab. 12: Status LEDs for operating state and fault
5.1.2
Status LEDs for adjustment mode and specific setting
The changing of a setting in the corresponding mode is signalled by the corresponding
status LED!
Here the top contact status LED indicates the active mode, the bottom manual status
LED indicates the actual setting of the active mode!
Mode 1
Mode 2
Mode 3
Signal input contact type
(Low level/Empty/Ext. stop)
Contact type
Relay output
Function
Relay 2
Status LED
Contact status LED (top)
Manual (bottom)
Green
Amber
Red
Green
NO *
NO *
Low level *
Amber
NC
NC
Stroke signal
Red
—
—
Contact input
Tab. 13: Status LEDs for adjustment mode and specific setting
*
Factory setting
