29
© 2017 JTECH Medical MN022_M
Wireless Algometer
(9RF307)
Used to convey pain response and pressure threshold.
Features and Benefits
•
Measures up to 25 lb
•
Multiple tip sizes for different testing applications
•
Replaceable rubber tips
•
Use for both Algometry and Finger strength testing
•
Axis Compensation
TM
“smart” load cell technology. Maintains accuracy even when force is applied off-
center.
General Algometry Testing
Prior to beginning a test, ensure that the test defaults are set as desired (i.e. unit of measurement, number of
tests, number of repetitions, etc.). Once test defaults are set, choose the “Test” option from the main menu,
and follow these steps:
1 .
Select “Algometer” from the Test Menu (Note: if you have purchased a new instrument and it is not on the
list, see page 18 for instructions or contact customer service to register your new instrument).
2 .
Upon selection, the Commander Echo Console will attempt to connect with the chosen instrument.
3 .
Press the “On” button for the corresponding instrument to establish a connection with the Commander
Echo Console.
4 .
The Commander Echo Console will require a instrument zeroing prior to starting each exam. With the
instrument in a neutral position (no pressure applied), press the Control Stick to set the instrument zero.
5 .
The Commander Echo will automatically advance to the next available test in the series. If no test data is
currently being stored for the instrument, it will begin with Test 1. If all of the selected tests already have
data stored, then the Commander Echo Console will display Message 2 on the LCD and not allow further
testing until the data has been erased, or the test settings have been altered to allow for more tests.
6 .
Ready the patient and begin the test (Note: see the optional Multimedia Help System CD for further
information on specific testing procedures).
7 .
Once you have completed the pre-set number of repetitions for each side/test, the Commander Echo will
automatically advance to the next test in the exam.
8 .
Once all tests have been completed, the Commander Echo Console will display Message 2 on the LCD to
notify you that there are no more empty tests available. Pressing the Control Stick will bring you back to the
main menu
