© 2017 JTECH Medical MN022_M
28
Wireless Algometer
(9RF307)
Used to convey pain response and pressure threshold.
For instructions on operating the Commander Echo Console, please refer
to the Console Section of the manual.
For instructions on performing specific tests, please refer to the optional
Multimedia Help System CD.
For troubleshooting information, please see page 43
For technical specifications, please see page 55
1 .
Attach appropriate accessory to Algometer by inserting the
metal shaft on the accessory into the accessory receptacle on
the Algometer.
Note:
One of the Algometry Tips must be used
with the Algometer.
2 .
Push the “On” button to enable communication with the
Commander Echo Console.
0.5cm
2
Algometer Tip (8AC006) – The 0.5cm
2
Algometer Tip
can be used for cervical testing.
1.0cm
2
Algometer Tip (8AC005) – The 1.0cm
2
Algometer Tip
conforms to normative testing.
Finger Tip Adapter (8AC007) – The Finger Tip Adapter converts
the Algometer for testing individual finger strength.
Accessories
Flat Pad (8AC008) – The flat pad is used for calibration of the
algometer.
Wrist Lanyard (7AC006) – The Wrist Lanyard is used to
help prevent dropping devices when carrying, or when
performing some tests.
Notice: It is recommended not to use the Flat Pad with the
Algometer for anything other than calibration. Improper use of the
Flat pad could result in exceeding the force limits of the instrument.
Exceeding the force limits of the instrument can permanently
damage the internal components of the Algometer.
