66
XP70 Instruction Manual
The Model Name function is used to input and assign
the model’s name to a specific memory, allowing easy
identification of each model’s program. Each model’s
name is displayed on the main screen when that model is
selected. Up to eight characters that include numbers and
letters are available.
Press the
Down
and
Select
keys simultaneously, then
turn on the transmitter.
Press the
IncreaSe
or
DecreaSe
key until the
MODEL NAME
screen appears.
Model Name
To Enter the Model Name Function
Press the
Select
Key to move the cursor to the desired
character’s position.
Press the
IncreaSe
or
DecreaSe
key to select the
desired character.
[MODEL NAME
MODEL 1 HELI
PPM <JR-PROPO>
≥
Press to enter main screen
Press to enter MODEL NAME
INCREASE and DECREASE key
To Enter the Copy Function
Press the
Down
and
Select
keys simultaneously
and turn the power switch ON to access the System
Setup Mode
Press the
UP
or
Down
key until
MODEL SELECT
appears on screen.
Press the
Select
button to enter the
COPY
screen.
Press the
IncreaSe
or
DecreaSe
keys to select the
model that you wish to copy the model to.
Press the
clear
key to copy the model to the selected
model memory.
NOTE
: Be aware that the model that you copy to
will have its memory replaced with the new model,
and the programming information for that model
will be erased.
[MODEL SELECT]
MODEL 1
ACRO SPCM
MODEL 2
ACRO SPCM
◊COPY
≥
Press to enter main screen
Press to select MODEL SELECT
INCREASE and DECREASE key
Press to copy selected model
Press to enter COPY screen
