XP70 Instruction Manual
The XP70 offers six (6) programmable mixes that allow
stick or switch inputs to control the output of two or more
servos. This function allows mixing any one channel to
any other channel or the ability to mix a channel to itself.
The mix can remain ON at all times, or it can be switched
OFF in flight, using a number of different switches. Mix
values are adjustable from 0 to 1%. Each channel is
identified by a four-character name (i.e., Aileron - AILE,
Elevator - ELEV, etc.). The channel appearing first is the
master channel. The second channel is the slave channel.
For example, AILE - RUDD would indicate aileron to
rudder mixing. Each time the aileron stick is moved, the
aileron will deflect, and the rudder will automatically
move in the direction and to the position based on the
value input in the programmable mix screen. Mixing
is proportional, so small inputs of the master channel
will produce small outputs of the slave channel. Each
programmable mix has a mixing offset. The purpose of the
mixing offset is to redefine the neutral position of the slave
channel.
NOTE
: programmable mix and 6 have a built
in trim include function. If programmable mix or 6
is selected and a master channel is selected that
has a trim lever (ie. aileron, elevator rudder or
throttle) the trim will operate both the master and
the slave channel.
ON:
Mixing Always On
MIX:
Mixing Switch Toward Self
Flap 0: Flap Switch in Flap 0 Position
Flap : Flap Switch in Flap Position
Programmable Mixing 1-6
Assigning Channels
Press the
Down
and
Select
keys simultaneously to
access the Function Mode.
In Function Mode, use the
UP
or
Down
keys to select
the desired
PROG. MIX
screen. (1-6)
Press the
IncreaSe
or
DecreaSe
keys to select the
desired master channel.
Press the
Select
key to highlight the slave channel.
Press the
IncreaSe
or
DecreaSe
keys to select the
desired slave channel.
[PROG.MIX1]
◊THRO≥ THRO ON
RATE: 0%
0%
SW:ON
OFFSET: 0
Press to enter
Function Mode
Press to enter PROG MIX
Press to select master channel
or slave channel
Press to highlight
master channel or
slave channel
Press to return
value to default
