19
XP70 Instruction Manual
Travel Adjust
With the power off, turn the transmitter on then press the
clear
key to enter the main menu.
Press the
Down
and
Select
keys simultaneously to
enter the function mode.
Press the
UP
or
Down
key until
TRAVEL ADJUST
appears on screen. Press the
Select
key to move the
cursor arrow to the desired channel.
Use the
Select
key to choose the appropriate channel
that you wish to adjust.
Press the
IncreaSe
or
DecreaSe
key to increase or
decrease the servo throws in each direction. While holding
the channel or switch in the desired direction press the
IncreaSe
or
DecreaSe
key to adjust the travel adjust
in that direction.
This completes the basic Quick Start setup for your
airplane. For additional features like Dual and Expo
rates, Mixing, etc, see the appropriate pages listed in
the table of contents.
NOTE
: If your airplane’s ailerons are controlled
independently by two servos, see “Wing Type
Press the
Select
key to select the desired channel then press the
IncreaSe
or
DecreaSe
key to select reverse or
normal servo direction.
[TRAVEL ADJUST]
THRO
≥H 100%
L 100%
ELEV
D 100%
U 100%
AILE
L 100%
R 100%
RUDD
L 100%
R 100%
Press and hold to enter Function Mode
Use to select
TRAVEL ADJUST
Use to increase or
decrease throw
Press to enter main menu
