1
XP70 Instruction Manual
The Aileron-to-Rudder Mixing function is designed so that
when input to the aileron stick is given, the rudder servo
will also move, eliminating the need to coordinate these
controls manually. This mixing program can be turned
ON/OFF by a switch. The switches that can be selected
are shown on the chart at right, with their abbreviations as
they appear on the screen and the corresponding switch
positions. Mix values are adjustable from 0 to 1%.
When adjusting the mix value, if an opposite mixing
direction of the rudder servo is required, simply press the
IncreaSe
or
DecreaSe
key and change the mixing
value from + to - or - to +. This will reverse the mixing
direction of the rudder from its original direction.
ON:
Mixing Always ON
MIX Switch ON/OFF Using Mixing Switch
Flap 0 Switch ON/OFF Using Flap Mix Position 0
Flap Switch ON/OFF Using Flap Mix Position
Aileron-to-Rudder Mixing
To Access the Aileron-to-Rudder Mix Function
Press the
Down
and
Select
keys simultaneously to
access the Function Mode
In Function Mode, use the
UP
or
Down
key to select the
AILE-RUDD MIX
screen.
[AILE->RUDD MIX]
◊RATE: 0%
OFF
SW: MIX
Press to enter
Function Mode
Press to enter AILE-RUDD MIX
Press to adjust value
Press to highlight
RATE or SW
Press to return
value to default
To Adjust the Mix Value
To Assign a Switch
Press the
Select
key to highlight
RATE
or
SW
(switch)
With
RATE
highlighted, press the
IncreaSe
or
DecreaSe
keys to adjust the mix value.
NOTE
: To reverse mix directions, a negative mix
value is accessible.
With
SW
highlighted, press the
IncreaSe
or
DecreaSe
keys to select the desired switch used to turn
on/off the mix.
