XP70 Instruction Manual
The purpose of the Flap System is to set the aircraft in
a landing attitude for more consistent landings. This is
accomplished by selecting values for the elevator, flap
and to be activated when the land switch is engaged. The
landing system can also be activated by a preset position
of the throttle stick. Refer to the Automatic Landing Attitude
Section for more information on how to select the preset
throttle position.
Flap System
Accessing and Utilizing the Flap System
To access the landing system feature (refer to figure A):
1. Place the transmitter power switch in the ON (upper
position).
. Press the
UP
and
Select
keys simultaneously to
enter the Function Mode.
. Press either the
UP
or
Down
keys until
FLAP SYS
appears in the upper left portion of the LCD.
. Press the
Select
key to position the cursor at the
desired function (i.e., ELEV, FLAP, SPOI, AUTO).
. Press the
UP
or
Down
keys to set the value for flap
and elevator travel. The
UP
key adds up flap/elevator
and the
Down
key adds down flap/elevator. The
input is adjustable from 1% for flap and -00% for
elevator. This results in a flap input from 0–60 degrees
and an elevator input from 0–0 degrees.
[FLAP SYS.] NORM
FLAP ELEV
NORM ◊UP100% 0
0
0
MID
LAND
AUTO INH
DN100%
0%
Press to enter
Function Mode
Press to enter FLAP SYSTEM
Press to adjust value
Press to highlight
RATE or SW
Press to return
value to default
