7
XP70 Instruction Manual
Information pertaining to each function is explained on
the page number listed next to the function name. System
Mode includes programming functions that are normally
System Mode Flowchart
[MODEL NAME]
MODEL 1 ACRO
PPM <JR-PROPO>
≥
To Enter the System Setup Mode
• With the power switch off, press and hold the
Down
and
Select
keys simultaneously.
• Turn on the power switch
• The system will display the last screen that was
used in system set up mode. You are now in
System Setup mode.
To Exit the System Setup Mode
• Press the
Down
and
Select
keys
simultaneously
• The warning screen will be displayed showing
the previously selected channel or turn the
transmitter off.
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
ACRO PPM
[MODULATION]
MODEL 1 ACRO
SPCM
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
[TRAINER]
≥NORMAL
SW:L-ROCKER
[MODEL RESET]
MODEL 1 ACRO SPCM
◊DATA RESET
INTEG-T
0:00:34
[D/R SWITCH SEL]
≥INDIVID
[WING TYPE]
≥FLAPERON OFF
DELTA OFF
V-TAIL OFF
[SYNTHESIZED CH]
FREQ. 72.09MHz
CH 15
[THRO RECOVERY]
INH
[INPUT SELECT]
≥AUX2:2P SW
AUX2 TRIM:INH
FLAP:SYSTEM
FLAP TRIM:ACT
Model Select (Pg )
Model Name (Pg )
Model Type Select
(Pg )
Modulation (Pg )
Model Reset (Pg 7)
Trainer (Pg 8)
Dual Rate Select Switch
(Pg )
Synthesized Channel
(Pg )
Wing Type (ACRO)
(Pg 1)
Input Select-Air (Pg 0)
Throttle Recovery
(Pg 9)
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
ACRO PPM
Hold while turning on transmitter
Up and Down Key
INCREASE and DECREASE key
CLEAR key
used during set up. System Setup programming functions
include:
