XP70 Instruction Manual
The XP70 features a memory function that stores the
programmed data for up to 0 models. Any combination
of up to 0 airplanes and/or helicopters can be stored in
memory. A model name feature with up to eight characters
allows each model to be easily identified.
Press the
Down
and
Select
keys simultaneously and
turn the power switch ON to access the System Setup
Mode. Press the
IncreaSe
or
DecreaSe
key until the
MODEL SELECT
screen appears
Model Select/Copy Function
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
ACRO PPM
Press to enter main screen
UP and DOWN key
INCREASE and DECREASE key
[MODEL SELECT]
MODEL 1
ACRO SPCM
MODEL 2
ACRO SPCM
◊COPY
≥
Press to enter main screen
Press to select MODEL SELECT
INCREASE and DECREASE key
Press to copy selected model
To Enter the Model Select Function
To Enter the Copy Function
Press the
Down
and
Select
keys simultaneously and
turn the power switch ON to access the System Setup
Mode
Press the
UP
or
Down
key until
MODEL SELECT
appears on screen
Press the
Select
button to enter the
COPY
screen
Press the
IncreaSe
or
DecreaSe
keys to select to
model that you wish to copy the model to
Press the
clear
key to copy the model to the selected
model memory
NOTE
: Be aware that the model that you copy to
will have its memory replaced with the new model
and the programming information for that model
will be erased.
Press the
IncreaSe
or
DecreaSe
key to select the
desired model memory.
Press to enter COPY screen
