6
XP70 Instruction Manual
Includes programming functions that are normally
used during setup. System Setup programming
functions include:
Section 7.1: System Setup
• With the power switch off, press and hold the
Down
and
Select
keys simultaneously.
• Turn on the power switch
[MODEL NAME
MODEL 1 HELI
PPM <JR-PROPO>
≥
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
HELI PPM
[MODULATION]
MODEL 1 HELI
PPM
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
[MODEL RESET]
MODEL 1 ACRO SPCM
◊DATA RESET
INTEG-T
0:00:34
[SWASH TYPE]
1 SERVO
NORM
[SYNTHESIZED CH]
FREQ. 72.09MHz
CH 15
[THRO RECOVERY]
INH
[INPUT SELECT]
≥AUX2 GEAR
HOLD ACT
[TRAINER]
≥NORMAL
SW:L-ROCKER
Model Select (Pg 6)
Model Name (Pg 66)
Type Select (Pg 67)
Modulation (Pg 68)
Model Reset (Pg 70)
Channel Select (Pg 7)
Swash Type (Pg 7)
Input Select (Pg 7)
Throttle Recovery
(Pg 7)
Trainer (Pg 71)
[MODEL SELECT]
◊SELECT
MODEL 1 JR-PROPO
HELI PPM
Hold while turning on transmitter
UP and DOWN key
INCREASE and DECREASE key
CLEAR key
To Enter the System Setup Mode
• The system will display the last system setup
screen that was used.
To Exit the System Setup Mode
• Press the
Down
and
Select
keys
simultaneously.
• The warning screen will be displayed showing the
previously selected channel.
• Or turn the transmitter off to exit the System Setup
Mode.
