JR XP7202 Instruction Manual Download Page 48

Page: 48 / 104

XP70 Instruction Manual

The Sub-Trim function allows you to electronically adjust

the centering of each servo. Sub-trim is individually

adjustable for all seven channels, with a range of + or -

1% (+ or - 0 degrees servo travel).

CAUTION

: Do not use excessive sub-trim values as

it is possible to overdrive the servo’s maximum travel.

NOTE

: The maximum sub-trim value available is ±

1 for the channel being programmed.

The channels available are:

THRO: Throttle

AILE:

Aileron

ELEV:

Elevator

RUDD: Rudder

GEAR: Retractable Landing Gear

FLAP:

Flap

AUX: AUX

Sub-Trim

[SUB TRIM]

≥THRO AILE

0 0

ELEV RUDD

Press to enter

Function Mode

Press to enter SUB TRIM

Press to adjust servo position

Press to select

desired channel

To Access the Sub-Trim Function

Press the

Down

and

Select

keys simultaneously to

access the Function Mode

In Function Mode, use the

Down

key to select the

SUB TRIM

screen.

Press the

Select

key to access the desired channel.

Press the

IncreaSe

DecreaSe

keys to adjust the

sub-trim position for that selected channel.

Summary of Contents for XP7202









































































































Search results

Summary of Contents for XP7202

Reviews:

Brands by name

Popular brands

JR XP7202, Instruction Manual

Search results

Summary of Contents for XP7202

Reviews:

Brands by name

Popular brands