59
TRIM INPUT SWITCH
Each Function in the System List
Function Explanation
Among each of the functions, there are some items that set numerical values. These must be set in each
screen by selecting the adjusting location and carrying out the settings using the dial. This function allows
adjustment of these numerical value settings using the desired trim. The function enables the creation of
four systems, and for each it is possible to set which trim can be used for adjusting the values. In addition,
the switching ON/OFF of this function can also be carried out using the Flight Mode switches or other
switches. In this new function, the previous troublesome adjustments that were carried out using the dial
while the Setting screen was being displayed have been eliminated, so that adjustment of the required
functions can be easily carried out even during flight using the INFO screen and Telemetry screen.
(Ex.: Gyro Sensing/Governor/Rudder→Aileron/Elevator Mixing, etc.)
•
Setting Method
The Trim Input switches have four types, from “TIS0” to “TIS3”.
For each Trim switch, select which Trim Lever will be used to operate it.
Then select which switches are to be used to switch ON/OFF this Trim In function.
Click on each □ mark to change it to ■ and set it to ON.
If “AND” is clicked, only one location will be set to ON in each switch position.
•
In the situation where there is a “TRIM IN” display in each function screen, it will also be possible
to move to this Setting screen.
•
●
Trim Levers that can be Selected
●
Select the Switches that Switch ON/OFF the Function (There are 3 pages)
Hint
【TRIM IN SW】
Dial
Helicopter
Airplane
Glider
Actually operate the servos and carefully confirm the settings before flying.
Caution Items
Set the selected item to
inverse display by rotating
the dial, and press the dial
to display the setting box.
This selects the switches for
switching ON/OFF this function
Switch ON/OFF Condition Display
This selects the Trim Lever
that enables setting by
the numerical values
Summary of Contents for xg8
Page 77: ...76 MEMO...
Page 90: ...89 MEMO...
