JR ProPo xg8, Operation Manual

Page: 26 / 92

25
GYRO SENSING
Each Function in the Function List
Function Explanation
This function controls the gyro sensitivity using the GEAR channel and the Auxiliary (AUX) channel. It has a
function for adjusting the gyro sensitivity from the transmitter. Response is provided from a mode that
allows setting of tail lock sensitivity to normal sensitivity using one channel to also support “Dual Gain” as
employed in JRʼs G7000 where setting is carried out using two channels. Further, use with two gyro units is
also possible. The sensitivity switching of each unit can be set using each switch and also in the Flight Mode.
•
Setting Method
Depending on the settings, the Setting screen may have a maximum of 3 pages, and the displayed items
may also change. Rotate the dial to move to and select the item that can be set on the screen (inverse
display). Then press the dial to display the setting box, and carry out the numerical value setting.
In the displays in this function, selection of the Flight Mode switches using the Device Select screen and Extension
switch setting can be carried out. Further, if the Throttle Hold is not set to “ACT”, the switches will not all be
displayed. In addition, the displayed names will also be different for each model type.
•
There are three types of gyros as
shown in the figure at right.
Carefully read the gyro operation
manual and set the type of gyro.
By using the Trim Input, because
it will be possible to change the
gyro sensitivity value using the
trim lever, the sensitivity can be
easily adjusted even when the
aircraft is flying.
•
・
Please carefully read and fully
understand the manual of the gyro
that is being used in advance
before using the gyro.
Be certain to move the tail around
to confirm the gyro output direc-
tion before flying.
•
•
Caution Items
●
Select the Sensitivity Switching Switch.
Hints
In the last page of the screen, set the Sensitivity Switching switch.
Set the sensitivity and Gyro Mode for each switch.
If AUTO is selected, the sensitivity
switching setting for each Flight
Mode will be applied.
Further, by operating the switch
that you wish to use, input will be
automatically carried out.
【GYRO SENS】
Setting Values and Actual Output Values
NORMAL
T.LOCK
T
N
DUAL GAIN
NORM GAIN
T.LOCK
The upper numerical values are the setting values.
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
During switch
switching, the time
will be delayed only in
the high sensitivity
direction.
If “GYRO” is set to two output channels in the Device Select
screen, this screen will be displayed.
It will be possible to select twin gyros or dual gain.
Helicopter
Airplane
Screen for Airplanes
Corresponding Switch Display (Flashing)
Gyro Mode Selection Sensitivity Setting
Gyro Sensitivity Output Channel
Trim Input Switch Usage Selection
The type of Trim Input switch can be selected.
Gyro Type Selection
1
2