49
TIMER
Each Function in the Function List
Function Explanation
This transmitter incorporates two Timers and an Integrated Timer which counts up the transmit-
ter power ON time. The Timer can be selected from an Up Timer and a Down Timer. Each can be
operated in Flight Modes and through free switch selection.
•
Setting Method
Initially, because each of the Timers will be in the unset condition, select (INH) and press the dial
to select the Timer type. Matching this, set the time and set the starting and stopping switches.
Rotate the dial to move to the items that can be set (inverse display) on the screen to select the
item. Then press the dial to display the setting box and carry out the setting.
•
The Down Timer can be set up to a maximum of 59 minutes 59 seconds. A signal will sound
every 10 seconds for times of 1 minute or less, and every second for times of 10 seconds or less.
From zero, the timer will start counting up in the “+” display.
In the Up Timer (Stopwatch), a signal will sound every minute.
•
•
The setting values will be reset to their initial values using the CLR key.
This screen can be entered from the Timer display of the Initial INFO screen.
The switch names on the Switch Selection screen will differ slightly depending on the model type.
While the Timer part of the Initial INFO screen is being selected, the CLR key can be used to reset
the values.
•
•
•
•
Hints
【TIMER】
●
Timer Screen
(The screen only shows the TIMER 1 setting)
Example showing the Setting of the Up Timer to TIMER 2
Helicopter
Airplane
Glider
This selects
the Timer operation.
Integrated Timer Time Reset
This sets the Down Timer time.
This selects the start
and stop switches.
“Yes” will reset the Timer.
Summary of Contents for xg8
Page 77: ...76 MEMO...
Page 90: ...89 MEMO...
