34
AILERONS → FLAPS
Each Function in the Function List
Function Explanation
This function mixes the aileron operation to the wing root flaps. This allows maneuvering using
only ailerons to minimize the generation of air resistance when you wish to speed up the roll
rate.
If Dual Flaps have not been set in the Wing Type screen on the System List, this screen will be
displayed as being unable to use.
•
Setting Method
The mixing amounts from the ailerons to the flaps can be set separately for the left and right.
In addition, the switch for setting this function ON/OFF will be initially set to MIX-SW. In the
situation where this is to be changed, this should be carried out using “SW SEL”. It is also pos-
sible to set whether the Aileron Trim is to be included in the mixing. For all items, rotate the
dial to select the item that can be set, then press the dial to display the setting box.
【AILE→FLAP】
Airplane
Actually operate the servos and carefully confirm the settings before flying.
Caution Items
In the situation where Trim is to be included in
the mixing, this item should be set to ACT.
Operation Condition
To the Switch
Selection screen.
This sets the
mixing amount
to the flaps.
Summary of Contents for xg8
Page 77: ...76 MEMO...
Page 90: ...89 MEMO...
