32
FLAP SYSTEM
Each Function in the Function List
Function Explanation
The flaps can be controlled in three stages using the switches. (Delay is possible.) Additionally, there is a func-
tion that carries out mixing to the elevators. There is also an Auto Throttle function that automatically lowers
the flaps when the throttle stick is lowered.
Further, aileron axis correction is also possible when the flaps have been greatly lowered while using the
flaperons.
In this screen, if the flap channel output has not been set to “SYS” in Device Select, the channels will be
displayed as being unusable.
•
Setting Method
This screen has three pages. Rotate the dial to select the items that can be set, then press the dial to
display the setting box.
【
FLAP SYS.
】
●
Page 1
This carries out the flap settings and the setting of corrections to the elevators.
●
Page 2
This carries out the correction setting to the ailerons.
Airplane
●
Page 3
This carries out allocation to the Flight Mode and Auto Throttle settingung.
Actually operate the servos and carefully confirm the settings before flying.
Caution Item
The Trim Input switches can be used.
Movement Delay Time
Setting
Setting of the mixing
amounts of each position
to the elevators.
Servo Position in
Each Flap Position
This sets the mixing
amounts for each
position to the ailerons.
Movement Delay Time
Setting
The Trim Input switches can be used.
Auto Throttle Position Setting
This sets the flap
positions for each
Flight Mode.
Summary of Contents for xg8
Page 77: ...76 MEMO...
Page 90: ...89 MEMO...
