JR ProPo XG6, Operation Manual

Page: 39 / 84

37
▋ Motor▋System【MOTOR▋SYSTEM】
▋
▋
Function▋Explanation
This function is used to switch off (HOLD) the motor channel by using a switch or by selecting
various flight mode positions. By using the Delay function, it is possible to smoothly run the motor from low r.p.m.
to higher r.p.m. in a linear (smooth) transition (Note: The speed controller must allow a linear transition to utilise
this function).
▋
▋
Setting▋Method
In order to activate this function, it is necessary to set the “GEAR” channel to “MOTO ”under the System List (Note
that the Gear channel is set to Motor as default ). Set the Motor hold position and allocate a switch or flight mode
as desired.
⿟ Hold Delay (HOLD DELAY)
↑ : Delay time before switching on the motor.
↓ : Delay time before switching off the motor.
▋ ▋ Caution▋Note
⿟ Set the speed controller to run the motor and carefully confirm the settings before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Function▋List
Hold Delay (HOLD DELAY)
Hold Position
SW Select
Delay adjustable between INH (0) to 2.0 seconds.
Rudder
Aileron
Additional mixing
Elevator Aileron
Mixing A
Rudder Elevator
Mixing B
Elevator Aileron
Rudder
Mixing A Mixing B
(Include Setting)
XG6.indd 37 12/03/01 16:03