JR ProPo XG6, Operation Manual

Page: 29 / 84

27
Each flight mode is allocated a different pitch curve. It is possible to modify these curves independently for each
flight mode.
⿟ Copy function
It is possible to copy the Normal mode curve to Stunt mode or Hold mode or vice versa. Select the flight
mode curve and execute copy by pressing the dial, and them confirm by pressing "YES" to complete the copy
operation.
⿟ The numerical value “IN” shows the position of the throttle stick and the numerical value “OUT” shows the output
value to the servo.
⿟ Adjustment is possible over a range between 0 and 100% for each of the low and high (up and down) directions.
▋ ▋ Caution▋Note
⿟ After programming, operate the servos and carefully confirm each Flight Mode setting before flying.
Adjusting point display
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position
Current Flight mode position
Each Adjusting point input
Position and output position
ADD / NON / DEL
Point addition and deletion
Copying Curve
Stunt mode
Normal mode
Select Flight Mode (Copy mode)
Confirmation screen for copying
Value of throttle stick position
Output value to the Servo
Function▋List
Adjusting point display
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position
Current Flight mode position
Each Adjusting point input
Position and output position
ADD / NON / DEL
Point addition and deletion
Copying Curve
Stunt mode
Normal mode
Select Flight Mode (Copy mode)
Confirmation screen for copying
Value of throttle stick position
Output value to the Servo
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
XG6.indd 27 12/03/01 16:03