JR ProPo XG6, Operation Manual

Page: 7 / 84

5
▋ Switch▋Identification▋Stickers
Affix the sticker for your preferred model type. Remove any
dust from the affixing surface, and then detach the sticker
from the backing paper. Next, apply the sticker to the
transmitter surface, carefully matching the edges with the
sticker area marked on the transmitter.
Preparation
Lock
Unlock
Lock
Unlock
▋ Stick▋Length▋Adjustment
Undo the recessed set screw located at the tip of the
control stick. Now rotate the entire stick to adjust its
length. When finished, lock the recessed set screw.
▋ Neck▋Strap▋Attachment
For long flights you may choose to use a neck strap.
Lock
Unlock
Lock
Unlock
▋
Inserting▋and▋Removing▋the▋Micro▋SD▋Card
Compatible Micro SD Cards are 16GB or less in size and must be formatted in FAT format.
Inserting and removing Micro SD cards should be carried out after opening the battery cover, with the transmitter
switched off. The Micro SD card slot is located below the battery. Note that not all Micro SD cards are compatible
with this transmitter.
▋ ▋ Inserting▋method
Switch off the transmitter, and then slowly insert the Micro SD card
into the slot below the battery until you feel a “click”. Note the correct
orientation of the card.
▋ ▋ Removing▋The▋Card
Lightly press in the middle of the Micro SD card until it clicks - the card
will then pop out slightly when you remove your finger ‒ now carefully
pull the card out the rest of the way.
Lock
Unlock
Lock
Unlock
XG6.indd 5 12/03/01 16:03