49
Model Erase
Model data stored on the “INTERNAL” memory or SD CARD can be erased. Be sure to double check the model
being erased before continuing.
※ If the currently selected model is erased, the new model creation wizard will automatically start. If you wish to
use data from the current model number, be sure to copy it to another model number first and then erase the
particular model from the Model Select function.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更
スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
The ”TRANSFER” of data between transmitters can be only achieve when the Trainer cable (Sold Separately) has
been plugged into the XG6 and the transmitter power switch is turned off.
When a model transferred from another transmitter is used, it will be necessary to re-bind with the receiver.
▋
▋
Caution▋Note
While this screen is displayed, and during the copy procedure, NEVER remove the Micro SD Card under any
circumstances.
There will be a danger of destroying Model Data which is on the card.
Only insert or remove the Micro SD card when the transmitter power is switched off.
Actually operate the servos and carefully confirm all settings before flying.
Confirmation of Radio RF output
Model copy can be selected by
INTERNAL, SD-CARD or TRANSFER.
※ When the SD CARD is chosen, be sure to Input the File name first.
Copy Destination
Copy Destination
Model selection display
Model selection display
Select application
Execute copying
Model selection display
Model selection display
Execute deletion
Model copy can be selected by
INTERNAL, SD-CARD or TRANSFER.
Copy Source
Copy Source
Model deletion can be selected by
INTERNAL, SD-CARD
Current model number
System▋List
XG6.indd 49
12/03/01 16:03
Summary of Contents for XG6
