JR ProPo XG6, Operation Manual

Page: 65 / 84

63
▋ ▋
For▋Glider
⿟ Launch Switch (LAUNCH)
By setting up a LAUNCH (Launch Switch) it is possible to set two additional flight Modes:
፧ Cruise Mode (CRUISE)
፧ Launch Mode (LAUNCH)
※ Launch Switch Reverse (LAUNCH REV)
It is possible to switch the Launch Switch position on the Flight Mode switch.
OFF : The Upper switch position (POS 0) will be set as Cruise and the Bottom switch position (POS 1) will be
set as LAUNCH (Launch Mode).
ON : The Upper switch position (POS 0) will be set as Launch and the Bottom switch position (POS 1) will be
set as Cruise (Cruise Mode).
⿟ Land Switch (LAND)
By setting up a LAND (Land Switch) it is possible to set the following two flight Modes:
፧
Cruise Mode (CRUISE)
፧
Launch Mode (LAUNCH)
⿟ Device Select (DEVICE)
Here input devices (switches, levers and trim switches) can be linked to a particular channel. Select the device as
desired.
⿟ Selection of Output (OUT)
Here the Output configuration of each channel can be specified.
INH : No output.
MOT : Use this channel for Motor control.
※ When the Motor Channel is set, “MOTOR SYSTEM” on the function List becomes activated.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ Even though a channel's OUT (Output) can be set to “INH”, it is possible to use the channel with a “PROGRAM
MIX” (on the function List) as a Master channel. It is also possible to set this under “DEVICE SELECT”
⿟ Touch Select function: When selecting a switch, by operating the switch that you wish to use, the switch will be
automatically recognize and be set to that function. It is useful when you are not sure of the switch name.
⿟ It is possible to select from the following two (2) movement options when using a trim lever as an Input device:
2P: 2 position movement
MO: Momentary Movement
▋ ▋ Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
Selection of Output (OUT)
Selection of Output (OUT)
Device Select (DEVICE)
Land Switch (LAND)
Launch Switch Reverse (LAUNCH REV)
Launch Switch (LAUNCH)
Device Select (DEVICE)
System▋List
XG6.indd 63 12/03/01 16:04