joule HHH-AEHP-00001, Installation & Maintenance Manual

Page: 24 / 116

24
www.jouleuk.co.uk | www.joule.ie
Use a lifting tool if moving the Modul-AIR upstairs.
Transport & Handling
Handling Instructions
• Care must be taken when transporting, storing and
installing the Heat Pump.
• The Modul-AIR unit is delivered securely packaged
in a polystyrene sandwich. Care should be taken
when transporting the Heat Pump ensuring that
the unit is not damaged by impact
• The Heat Pump must remain in the upright position
during transport.
• Do not remove the protective packaging until the
Heat Pump unit has reached its final location. This
will help protect the Heat Pump from damage.
• For transport, e.g. via a stairs, the Heat Pump may
be tilted for a maximum of 15 minutes up to a
maximum angle of 45 degrees.
• The Heat Pump can weigh up to 60kg. At least two
people are required to lift the unit at all times .
• The Heat Pump must be stored in a dry area
and always stored upright on a level base. The
temperature in the storage room should be
between 5°C and 50°C. The humidity may be a
maximum of 85%, non-condensing
• The unit must never be dropped during storage or
handling
• The installation area should be free from frost.
• The Modul-AIR unit must only be installed on a
plumb level wall with the required load bearing
capability.
• Installation, servicing, maintenance and repair
must be carried out by a competent person.