19
139760_A GF 500 DV Oct. 2017
Figure 35.
Pull the shutter stems forward to increase primary air. Push back to restrict air.
Figure 31.
Baffle Assembly location. Remove two 6 mm nuts to
detach it from the firebox.
BAFFLE COMMING OUT OF UNIT
Figure 32.
Pull the baffle plate down slightly, then swing the end
forward to remove it from the firebox..
Figure 34.
Re-secure the modified Secondary Baffle.
REMOVE TWO #8 SCREWS TO LOOSEN THE
BAFFLE WING. USING PLIERS BEND THE
PERFORATED PORTION OF THE SECONDARY
BAFFLE TILL IT BREAKS AWAY
THEN RE-INSTALL THE TWO SCREWS
AND THE SECONDARY BAFFLE TO
THE AS SHOWN. THIS IS THE
CORRECT SET UP WHEN CONVERTED
FOR LP GAS.
REMOVE TWO #8 SCREWS TO LOOSEN THE
BAFFLE WING. USING PLIERS BEND THE
PERFORATED PORTION OF THE SECONDARY
BAFFLE TILL IT BREAKS AWAY
THEN RE-INSTALL THE TWO SCREWS
AND THE SECONDARY BAFFLE TO
THE AS SHOWN. THIS IS THE
CORRECT SET UP WHEN CONVERTED
FOR LP GAS.
Figure 33.
Use pliers to break the end wings off the Secondary Baffle.
Remove wings
Secondary Baffle
Loosen these
screws.
Air Shutter Stems
Baffle Location / Fuel Conv 1
Baffle
Assembly
6 mm
Nut