EG0LD-1000 Electronic Grease Level Detector
Installation and Operating Procedures
__________________________________________________________________________________________
Page 3
1.0 General Description
The EGOLD-1000 Electronic Grease Level Detector product consists of the following components:
A wall mounted Control Unit that contains the level measurement micro-controller
electronics, control switches and indicators.
A Tank Probe assembly consists of a tank probe mounted to a bracket. Multiple probe lengths
are available to fit most existing manual interceptor configurations.
A U.L. approved wall mount low voltage power module.
A Cable to interconnect the wall mounted Control Unit and the Tank Probe assembly.
The Control Unit GLS housing, connectors, control switches and indicators are water resistant for
splash or spray conditions. The Tank Probe assembly is a sealed against water penetration.
The EGOLD-1000 Electronic Grease Level Detector product provide the following functions and
features:
Provides a continuous grease level measurement system that can be calibrated to most
existing manual interceptor configurations. Note: The interceptors must be made of metal.
Provides an integral level alarm to alert the user of the need for interceptor cleaning.
Provides a switch closure for a remote level alarm option.
Provides an easy method of alarm level calibration.
Provides an interface for an external Modem option that allows remote monitoring of the
system by telephone.
Figure 1-1 provides an illustration of the EGOLD-1000 System
