12
• Use the type of power supply shown on the label. If you are not sure about the type of
power supply available, ask your local retailer or electricity provider for assistance.
• Do not touch the inside of the device, unless specified otherwise in the instructions contained
in this manual.
• Never force the components when assembling: although it is made with high strength
materials, the parts of the device can be damaged if handled incorrectly.
• Do not try to perform maintenance work on the device, except where specified in this manual.
Opening or removing the outer casing may expose you to dangerous live parts or may involve
other risks. All maintenance work must be carried out by authorised staff, except where
specified in this manual.
• Unplug the device from the mains and contact qualified staff for assistance in one of the
following cases:
- The device has come into contact with water or liquids of any kind.
- The device has been exposed to the elements.
- A malfunction persists despite all the installation and/or maintenance procedures have been
performed properly.
• The device comes with slots and openings for ventilation; do not block or cover these slots.
• Make sure that you always leave enough space for adequate ventilation at the bottom and
around the side slots of the device.
• Place the device on a stable surface (avoid beds, sofas, blankets, carpets and so on).
IMPoRTanT The installer and the user, when using the
JO
NIX
cube
device, must
take into account and solve all the other types of risk associated with the system.
for example, risks arising from foreign bodies getting into the device or risks due
to dangerous flammable or toxic gases at high temperature.
6.2 GeTTInG sTaRTeD
6.3 cHoosInG THe InsTallaTIon sITe
• Check that the various components of the device are fully intact.
• Check that the documentation and any accessories for installation are contained in
the package.
• Carry the device in its packaging as close as possible to the installation site.
• Do not rest weights or tools on the device, or place it on an unstable surface.
• Do not put the device in places where there are flammable gases, acidic, aggressive
and corrosive substances that can damage the various components beyond repair.
• Provide a minimum clearance, in order to install the device and carry out routine and
special maintenance.
