Jonix 70WHITECUBE, Use And Maintenance Manual

Page: 13 / 28

13
01
02
• Make sure that the voltage and frequency shown on the plate match those of the electrical
mains to which the device is connected.
• The electrical mains of the
JO NIX
cube
device must be used for the device only, there must
be no other devices connected to the same power line. It is forbidden to use adapters or power
strips.
6.4 elecTRIcal connecTIons
aTTenTIon! befoRe sTaRTInG anY oPeRaTIon, MaKe sURe THaT THe MaIn
PoWeR sUPPlY Is DIsconnecTeD!
The JO NIX
cube
device leaves the factory fully wired and only requires connection to a
residential power socket as specified on the plate. Before making any connections make sure the
mains voltage complies with what is shown on the label.
6.5 elecTRIc PoWeR sUPPlY
Fig. 01: Connect the device to the mains
using the power cable provided.
6.6 UsInG THe DeVIce
Fig. 02: The ON/OFF switch is located at
the bottom of the device (see chapter 4).
To switch the device on press the red 0/I
button, switching it to I; you will hear a
slight hissing sound coming from inside the
device and the LED on the control panel will
light up, indicating that the unit is switched
on.
The presence of high voltage inside the
device is indicated by the relevant light,
located on the front panel, when the device
is switched on.
Fixed green LED: the device is on