19
12
11
13
5"
14
clIcK!
clIcK!
clIcK!
clIcK!
Device LED on
Fig. 11: Put the lid back on the device by
pushing it until the parts are locked in place.
Fig. 12: Reconnect the plug. Switch the
ionising device on by switching the On/Off
button to I.
Fig. 13: To reset, keep the keys
and
pressed for 5" until maintenance LED will
go off.
Check that the device works, you should
hear a slight hissing sound.
failure to clean the ionising generators when indicated by the device leads to a
drop in system performance.
The ionising generators can be
re-enabled only after the light
has gone off.
Fig.
14: Remove the filter cover by
pressing the sides and pulling towards you.
Clean the filter at the bottom of the device during every tube maintenance operation. However, we
suggest checking periodically the filter status and quickly removing any dust residues and any
other residues that may block the air flow.
7.2.2 cleaning the filter
