21
18
19
Fig. 18: Switch the ionising device off by
switching the On/Off button to O.
7.3.1 Replacing the ionising generators
Fig. 19: Put the device on a flat surface.
Remove the plug connected to the mains.
Replace the condensers as soon as the
relevant LED stays on permanently.
Fixed led: replacement required
The only part that is subject to wear is the ionising generators, whose performance drops over
time. Components must be replaced when signs of wear appear, indicated by oxide on the internal
mesh of the ionising generator, which will make it turn white, and by the glass looking dull.
The
JO
NIX
cube
device is designed to indicate, through a special LED, the need to replace the
ionising tubes approximately every 9000 hours of operation.
7.3 SPECIAL MAINTENANCE
