Command
(Cont.)
Select To
*
(status)
See the current condition of an object (for instance, alarm or override condition).
Displays up to eight conditions for an object at a time, arranged in order of
importance.
UNLATCH
Release the LATCHED status of an object. Latched objects are used in critical
situations to prevent the status of an object from returning to normal
automatically. UNLATCH returns the status to normal only if the alarm condition
has cleared. Available only when the BI object is latchable and is currently
latched.
HOLD/CLEAR
Dynamically display an object and its status at a regular interval while you are
logged off. Only six objects can be assigned to the Hold Summary. Hold objects
are not selectable on the Hold Summary. Remove the object from the Hold
Summary. When all objects are removed from the Hold summary, it will be
blank.
RESET
Silence any AC alarm horns that may be sounding due to alarm conditions.
NORMAL
Return all doors controlled by the AC to the their normal state according to the
current date, time, and controlling feature.
OPEN
Unlock a door to allow entry without the use of an access card. The door
remains in the Open state until the defined access time has elapsed. An alarm
occurs if the door is held open after the defined shunt time has elapsed (usually
within a minute).
SECURE
Lock a door allowing entry only with the use of a valid access card. This
command remains in effect until it is manually commanded to Open, or it is
overridden by an application feature.
ACCESS
Unlock a door allowing access without the use of an access card. Access
remains in effect until the door is manually commanded to the Secure state, or it
is overridden by an application feature.
Table 4b: Network Terminal Commands
Network Terminal User’s Manual
21
