Commands
Commands are available only when they are
boxed
. If an object is offline
or disabled, commands may appear but not be selectable. For example, if
a BO object is offline, the START or STOP commands may appear on
the screen
un
boxed, therefore
un
selectable.
The Commands vary from screen to screen. Most Commands are self
-
explanatory. The following table lists those Commands that are available
for an entire system, and for a system’s Hardware Objects and Software
Objects. There are two pairs of toggle Commands (that is, only one
command of the pair is available at any time): HOLD/CLEAR and
DISABLE/ENABLE.
The Command information in the following table is also available
through the NT’s online HELP feature.
Network Terminal User’s Manual
17
