manualshive.com logo in svg

Johnson Controls FMS-1655 Series, Installation Manual, Page: 8 / 70

Share
Download
Johnson Controls FMS-1655 Series Installation Manual Download Page 8

Due to continuous improvement, TRIATEK reserves the right to change product specifications without notice.

- 

1 

-

Due to continuous improvement, JCI reserves the right to change product specifications without notice.

Electrical

Optional External Remote Sensor Distance……………………………………………………………………………………………………Up to 1,000 feet

Optional External Remote Sensor....………………………………………………………………………………Wiring 18-22 AWG, shielded twisted pair

Power Supply..…………………………………………………………………………………………………………………………………24 Vac ±10%, 30Va

Accuracy of Measurement.....……………………………………………………………………………………………………………………………±0.5%FS

Pressure Range 

(NIST Traceable / Individual certification available as option)

…………………………………………………………………±0.2500 “WC

Pressure/Flow……………………………………………………………………………………………………………………………………up to 0.25 ”WC

4 Analog Inputs…………………………………………………………………………………………………………………4-20mAdc, 0-5Vdc or 0-10Vdc

4 Analog Outputs………………………………………………………………………………………………………………4-20mAdc, 0-5Vdc or 0-10Vdc

2  Thermistor  Inputs…………………………………………………………………………………………………………NTC  Type  2  or  3,  10kΩ  @  25°C

4 Digital Inputs………………………………………………………………………………………………0-5Vdc or 0-24Vdc, Active-High or Active-Low

3  Relay  Outputs...………………………………………………………………………………………………………………………………………1A@24Vdc

Control Signal Wire Size............……………………………………………………………………………………………………………………18-22 AWG 

Power Supply………………………Class 2, 24Vac ±10%, 30VA universal 120/240 to 24 Vac, 60/50 Hz, step-down isolation transformer provided

Communications

BACnet® MS/TP network....…………………………………………………………………………………………Two-Wire Twisted Pair, RS-485 signaling

Metasys

 N2 network...………………………………………………………………………………………………Two-Wire Twisted Pair, RS-485 signaling

Recommended Cable Type...……………………………………………………………………………………………………………………… Belden 3107A

Touchscreen User Interface

LCD Size....……………………………………………………………………………………………………………………………………………3.2” diagonal

LCD Type.....……………………………………………………………………………………………………………………………………………Transmissive

Resolution...………………………………………………………………………………………………………………………………………240 x 320 portrait

Viewing Area..……………………………………………………………………………………………………………………………50.60 mm x 66.80 mm

Color Depth.…………………………………………………………………………………………………………………………………18-bit or 262K colors

Backlight Color.....………………………………………………………………………………………………………………………………………………White

Luminous Intensity...………………………………………………………………………………………………………………………………Min 2500 cd/m2 

Recommended Cable Type (applicable to surface mount models FMS-1655-s-x only)…………………………………………………… Belden 3125A

Mechanical

FMS-1655 Internal Sensor Flush Mount Housing (Brushed Stainless Steel) Housing..……………………………………………5.6”W x 8.5”H x 1.9”D

FMS-1655 Display Module Housing………………………………………………………………………………………………………3”W x 5”H x 1.13”D

Stainless Steel Cover Plate for Flow Tube……………………………………………………………………………………………2.7”W x 4.5”H x 0.2”D

Stainless Steel Cover Plate for Remote Sensor………………………………………………………………………………………2.7”W x 4.5”H x 0.2”D

FMS-1655 with Flow Tube Cover Plate……………………………………………………………………………………………………………approx. 3.5 lb

FMS-1655 with Optional External Remote Sensor………………………………………………………………………………………………approx. 4.0 lb

FMS-1655 Mounting Options...……………………………………………………………………………………………………………………Surface, Flush

Flow Tube Cover Plate Mounting..……………………………………………………………………………………………………………………………Flush

Environmental

Operating Temperature..…………………………………………………………………………………………………………………32° to 125° F Operating

Operating Humidity……………………………………………………………………………………………………………10% - 95% RH, Non-condensing

 

       

GENERAL

Specifications

Summary of Contents for FMS-1655 Series







































































Reviews:

No comments