manualshive.com logo in svg

Johnson Controls FMS-1655 Series, Installation Manual, Page: 6 / 70

Share
Download
Johnson Controls FMS-1655 Series Installation Manual Download Page 6

Due to continuous improvement, TRIATEK reserves the right to change product specifications without notice.

Due to continuous improvement, JCI reserves the right to change product specifications without notice.

Due to continuous improvement, JCI reserves the right to change product specifications without notice.

GENERAL

  Specifications………………………………………………………………………………...……………………………………………1  -  2   

 

 

Part Number Guide…………………………………………………………………………………………………………………………2 

 

 

Overview……………………………………………………………………..…………………….………………………………………3 - 4

MOUNTING/WIRING

 

FMS-1655 Flush Mount With Internal Sensor  

 

 Introduction…………………………………………………………………………………………………………………………………5

 

 

Mounting Procedure………………………………………………………………………………………....……………………………5 - 6

 

 

Internal Sensor Illustration………………………………………………………………………….....……………………………………7

 

FMS-1655 With Remote Sensor

  Introduction…………………………………………………………………………………………………………………………………9

  Mounting 

Procedure………………………………………....………………………………………………………………………………9

 

 

FMS-1655 With Standard Remote Sensor Illustrations………………………………………………………………………....…10 - 11

 

 

Remote Sensor Configuration Illustration……………………………………………………………………………………………..12

 

 

Analog Output to Electric and Pneumatic  Damper Actuator Illustrations (Internal Sensor Model)………………....………13 - 14

 

 

Analog Output to Variable Speed Drive Illustration (Internal Sensor Model)………………………………………………..………15

 

 

Analog Output to Modulated Air Controller Illustration  (Internal Sensor Model)……………………………………………………16

 

 

Analog Output to Pneumatic Damper Actuator Illustration (Internal Sensor Model)………………………………………………17

 

 

Analog Output to Variable Speed Drive Illustration……………………………………………………………………………………18

 

 

Adding Remote Pressure Sensor with 4-20mA Out to Internal Sensor Model Illustration……………………………………19

 

 

Analog Input to 2 Remote Pressure Sensor 4-20mA Out Illustration……………………………………………………………… 21

 

 

Analog Input to 3 Remote Pressure Sensor 4-20mA Out Illustration……………………………………………………………… 22

 

 

Analog Input to 4 Remote Pressure Sensor 4-20mA Out Illustration……………………………………………………………… 23

 

 

Analog Input to Temperature Sensor Illustration……………………………………………………………………………………… 24

 

 

Custom Sensor Illustration………………………………………........................................................................……………………25  

 

 

Digital Input to Door Switch Illustration………………………………………………………………………………………………… 26

 

 

Digital Input to Occupancy Sensor……………………………………………………………………………………………………28

 

 

Relay Output Alarm Illustration………………………….………………………………………………………………………………29

 

 

Relay Output to Warning Illustration……………......…………………………………………………………………………………30

 

 

Relay Output 1 Illustration…………………........………………………………………………………………………………………31

 

 

Relay Output 2 Illustration………………........……....…………………………………………………………………………………32

  Power 

Illustration……………………………...….…………………………………………………………………………………………33

 

 

Isolated Power Supply………………………..……………………………………………………………………………………………34

 

COMMUNICATIONS - BACnet MS/TP

  Wiring 

Illustration………………………………………………………………………………………………………...…………………36

COMMUNICATIONS - METASYS N2 OPEN

  Wiring 

Illustration…………………………………………………………………………………………………....………………………37

 

FMS-1655 QUICK START GUIDE

  Quick Start Guide………………………………………………………………………………………………………....………………38

 

 

Main Display Screen………………………………………………………………….....…………………………………………………38

 

 

Automated Clean Cycle ………………………………………………………………...……………………………………………38 - 39

 

 

Configuring Room Pressure Monitor…………………………………………......………………………………………………………39

 

 

Setting Up Analog Output………………………………………………………..………………………………………………………39

 

 

Enabling Door Switch………………………………………………………………………………………………………………39 - 40

 

 

Setting Up Alarm Relay Output....……………………………………………….………………………………………………………40

 

 

Setting Alarm Limits...…………………………………………..…………………………………………………………………………40

 

 

Changing Isolation Mode.……………………………………..........……………………………………………………………………40

INSTALLATION MANUAL

Table of Contents

Summary of Contents for FMS-1655 Series







































































Reviews:

No comments