PMGB0406B rev.1
31
Ɣ
Johnson Controls Inc. pursues a policy of continuing improvement in design and performance in its
products. As such, Johnson Controls Inc. reserves the right to make changes at any time without
prior notice.
Ɣ
Johnson Controls Inc. cannot anticipate every possible circumstance that might involve a potential hazard.
Ɣ
This product is designed for standard air conditioning applications only. Do not use this product for
anything other than the purposes for which it was intended for.
Ɣ
The installer and system specialist shall safeguard against leakage in accordance with local
pipe
¿
tter and electrical codes. The following standards may be applicable, if local regulations are
not available. International Organization for Standardization: (ISO 5149 or European Standard, EN
378). No part of this manual may be reproduced in any way without the expressed written consent of
Johnson Controls Inc.
Ɣ
This product will be operated and serviced in the United States of America and comes with a full
complement of the appropriate Safety, Danger, and Caution, Warnings.
Ɣ
If you have questions, please contact your distributor or dealer.
Ɣ
This manual provides common descriptions, basic and advanced information to maintain and service
this product which you operate as well for other models.
Ɣ
This product has been designed for a speci
¿
c temperature range. For optimum performance and long
life, operate this product within the range limits according to the table below.
Temperature
Maximum
Minimum
Cooling
Operation
Indoor
89
o
F DB/73
o
F WB (32
o
C DB/23
o
C WB) 69
o
F DB/59
o
F WB (21
o
C DB/15
o
C WB)
Outdoor
118
o
F DB (48
o
C DB) *
14
o
F DB (-10
o
C DB) *
Heating
Operation
Indoor
80
o
F DB (27
o
C DB)
59
o
F DB ( 15
o
C DB)
Outdoor
59
o
F WB (15
o
C WB) *
-4
o
F WB (-20
o
C WB) *
DB: Dry Bulb, WB: Wet Bulb
* The temperature may change depending on the outdoor unit.
DX-Kit
Important Notice
Ɣ
This manual should be considered as a permanent part of the air conditioning equipment and should
remain with the air conditioning equipment.
Product Inspection upon Arrival
1. Upon receiving this product, inspect it for any damages incurred in transit. Claims for damage, either
apparent or concealed, should be
¿
led immediately with the shipping company.
2. Check the model number, electrical characteristics (power supply, voltage, and frequency rating), and
any accessories to determine if they agree with the purchase order.
3. The standard utilization for this product is explained in these instructions. Use of this equipment for
purposes other than what it designed for is not recommended.
4. Please contact your local agent or contractor as any issues involving installation, performance, or
maintenance arise. Liability does not cover defects originating from unauthorized modi
¿
cations
performed by a customer without the written consent of Johnson Controls, Inc. Performing any
mechanical alterations on this product without the consent of the manufacturer will render your warranty
null and void.
(Ins)DX-Kit̲4e-rev1.indd 31
(Ins)DX-Kit̲4e-rev1.indd 31
2016/11/25 15:32:47
2016/11/25 15:32:47
