manualshive.com logo in svg

Johnson & Johnson DINAMAP Compact T, Service Manual

The Johnson & Johnson DINAMAP Compact T is a state-of-the-art medical device that offers accurate and reliable blood pressure readings. Ensure optimum performance and convenience with our comprehensive Service Manual, available for free download at manualshive.com. Access the manual now and maximize the potential of this incredible product.

Share
Download
background image

DINAMAP* 

Compact 

Vital Signs Monitor 

 

  9

1.2.4 Replacement Accessories 

 
Replacements such as hoses and sensors must be purchased from Johnson & Johnson Health Care 
Systems, 
 

Tel: 01344 - 864000

 

 
Please have your account number and the reorder / product code available for the item you wish to 
order. 
 
A table of accessories and replacement part numbers appears in section 6.3. 
 

1.3 Service Centres 

 
For service, repairs or parts information, contact one of the following Johnson & Johnson offices or your 
local Johnson & Johnson service agent. 
 

 

Johnson & Johnson Medical Ltd., 
Service Centre, 
Unit 14, Wellington Business Park, 
Dukes Ride, Crowthorne, 
Berkshire. 
RG45 6LS 
 
Tel: 01344 750021 
Fax: 01344 750019 
 
 
Johnson & Johnson Medical GmbH, 
Ostrasse 1, 
22844 Norderstedt 
 
Telefon: 040/5 22 07-450 
Telefax: 040/5 22 07-490 
Hotline: 0130/13 73 85 
 
 
Johnson & Johnson Medical SANTE, 
1, Centrale parc-Avenue Dully Prudhomme, 
92298 Chatenay Malabry Cedex 
 
Tel: (1) 40 91 29 04 
Fax: (1) 40 91 29 50

 

 

1.4 Installation and Operation 

 
For information on the installation and/or operation of the DINAMAP*

 Compact

 Vital Signs Monitor, 

reference must be made to the DINAMAP*

 Compact

 Vital Signs Monitor Operation Manual 9000EM.  

This instrument is to be operated and serviced by authorised personnel only, and only in accordance 
with the Warnings and Precautions given in both the DINAMAP*

 Compact

 Vital Signs Monitor 

Operation Manual and this document. 

UK  

 
 
 
 
 
 
 
 

 
GERMANY

 

 
 
 
 
 
 

 
FRANCE

 

 

Summary of Contents for DINAMAP Compact T












































































Reviews:

No comments

Related manuals for DINAMAP Compact T

Ecco 200 Series Installation & Operating Instructions preview
200 Series
Brand: Ecco Pages: 4
JD Squared 3 Assembly & Operating Instructions preview
3
Brand: JD Squared Pages: 15
DAPAudio D1256 Manual preview
D1256
Brand: DAPAudio Pages: 16
3M 400 Series User Instructions preview
400 Series
Brand: 3M Pages: 28
GE b30 User'S Reference Manual preview
b30
Brand: GE Pages: 242
GE ATS1290 Instruction Manual preview
ATS1290
Brand: GE Pages: 24
Balanced Body Allegro How To Assemble preview
Allegro
Brand: Balanced Body Pages: 3
ICS ELECTRONICS 4803 Quick Start Manual preview
4803
Brand: ICS ELECTRONICS Pages: 6
YATEK ECO Owner'S Manual preview
ECO
Brand: YATEK Pages: 72
Daga AB Directions For Use Manual preview
AB
Brand: Daga Pages: 24
DAF DAVIE XDc II Quick Start Manual preview
DAVIE XDc II
Brand: DAF Pages: 68
Jackco 852 User Manual preview
852
Brand: Jackco Pages: 6
Keithley 7071 Instruction Manual preview
7071
Brand: Keithley Pages: 79
Kayakpro SUP ERGO Assembly Instruction Manual preview
SUP ERGO
Brand: Kayakpro Pages: 17
Yoshitake DS-1 Operation Manual preview
DS-1
Brand: Yoshitake Pages: 11
Tascam CC-222SL Technical Documentation preview
CC-222SL
Brand: Tascam Pages: 3
Velleman K4401 Illustrated Assembly Manual preview
K4401
Brand: Velleman Pages: 16
Velleman VTTEST11 Manual preview
VTTEST11
Brand: Velleman Pages: 11

Brands by name

Popular brands

Load more brands